Description
APPLICATION:
– The Max adhesive is an ideal solution for fixing the IZOL fireplace insulation board, making a mesh reinforced layer or thin-layer plaster on difficult substrates.
PRODUCT FEATURES:
– Reinforced with polypropylene fibre
– High flexibility, strength and durability
– Ergo-resistant and waterproof
– Very good adhesion
– Vapour permeable
– Very good operating properties
– Environmentally friendly.
SUBSTRATE:
– The substrate must be load-bearing, hard, dry and clean. Layers that weaken binding, e.g. fats, bitumens, dust, weak or cracked plasters, etc., should be removed.
– Unevenness and cavities greater than 10 mm should be repaired with cement mortar. Smaller unevenness can be levelled with MAX glue.
– Levelling or repairing the substrate should be done with a sufficient distance (about 1 day / 1 mm layer thickness) before gluing thermal insulation boards.
– Substrates with high water absorption (e.g. aerated concrete) should be primed approx. 12-24 hours before the work is done.
CHARACTERISTICS:
– Mixing ratio, approx. 2.5-3.0 l of water for 15 kg (bucket) of dry mix;
– Dry mix consumption, dry insulation, approx. 3-4 kg/m2, uneven surfaces, approx. 4-6 kg/m2
– Mortar use time, up to 2 hours;
– Application temperature: from +5°C to +25°C
– Buckets 15 kg +/- 200 g.